辉光放电聚合物结构及力学性质研究

采用低压等离子体聚合技术,通过调整工作气压和反式二丁烯(T₂B)与H₂流量比制备了辉光放电聚合物(GDP)涂层. 利用傅里叶变换红外吸收光谱和元素分析法讨论了工作气压和T₂B与H₂流量比对GDP涂层内部H原子含量及结构的影响,并且通过纳米压痕技术对GDP涂层的硬度及杨氏模量进行了表征.研究结果表明:降低工作气压和T₂B与H₂流量比,GDP涂层内sp³ C 关键词： 傅里叶变换红外光谱 纳米压痕 杨氏模量 硬度     

New differential properties of sup-type functions

In this paper, we study the directional derivative, subderivative, and subdifferential of sup-type functions without any compactness assumption on the index set. As applications, we provide an estimate of the Lipschitz modulus for sup-type functions.     

鞘氨醇与DPPC, DPPE单层膜的热力学特性及形态观察

鞘氨醇(sphingosine)是生物体内合成鞘脂的母体化合物, 是生物膜中的重要组分之一. 通过分析表面压力和平均分子面积(π-A)等温线数据分别研究了鞘氨醇与二棕榈酰基磷脂酰胆碱(DPPC)和二棕榈酰基磷脂酰乙醇胺(DPPE)二元组分单层膜的热力学特性, 并在恒定膜压下制备不同摩尔比例的混合脂膜用原子力显微镜进行观测. 实验结果表明: (1)鞘氨醇与DPPC组成的系统中, XD-Sph＝0.2, 0.4, 0.6时, 过量分子面积与过量吉布斯自由能在所研究的表面压力下表现为负值, 而当XD-Sph＝0.8时, 表现为正值; (2)鞘氨醇与DPPE组成的系统中, 当表面压力 π＜25 mN•m－1时, 过量分子面积与过量吉布斯自由能在所研究的组分比例下表现为负值, 当π≥25 mN•m－1时为正值. 混合单层膜的分子面积与表面吉布斯自由能决定了分子间的相互作用, 当为负值时分子间相互作用表现为吸引力, 出现凝聚现象; 为正值时分子间相互作用表现为排斥力, 促使单层膜出现相分离现象. 过量吉布斯自由能值越小, 单层膜的热稳定性越高. 弹性系数曲线分析和AFM图片观测进一步验证了理论分析的结果.     

L p approximation by Bernstein-Kantorovich quasi-interpolants

Bernstein-Kantorovich quasi-interpolants K^（2r-1）n（f, x） are considered and direct, inverse and equivalence theorems with Ditzian-Totik modulus of smoothness ω^2rφ（f, t）p （1 ≤ p ≤＋∞） are obtained.     

Lp approximation by Bernstein-Kantorovich quasi-interpolants

Bernstein-Kantorovich quasi-interpolants K(2r-1) n (f, x) are considered and direct,inverse and equivalence theorems with Ditzian-Totik modulus of smoothness ω2rψ(f, t)p (1 ≤ p≤+∞) are obtained.     

Partitions with initial repetitions

A variety of interesting connections with modular forms, mock theta functions and Rogers- Ramanujan type identities arise in consideration of partitions in which the smaller integers are repeated as summands more often than the larger summands. In particular, this concept leads to new interpretations of the Rogers Selberg identities and Bailey＇s modulus 9 identities.     

Changes in electronic,magnetic and bonding properties from Zr2FeH5 to Zr3FeH7 addressed from ab initio

Potential hydrogen storage ternaries Zr₃FeH₇ and Zr₂FeH₅, are studied from ab initio with the purpose of identifying changes in electronic structures and bonding properties. Cohesive energy trends: E_coh. (ZrH₂) > E_coh. (Zr₂FeH₅) > E_coh. (Zr₃FeH₇) > E_coh. (hypothetic-FeH) indicate a progressive destabilization of the binary hydride ZrH₂ through adjoined Fe so that Zr₃FeH₇ is found less cohesive than Zr₂FeH₅. From the energy volume equations of states EOS the volume increase upon hydriding the intermetallics leads to higher bulk moduli B₀ explained by the Zr/Fe–H bonding. Fe–H bond in Zr₂FeH₅ leads to annihilate magnetic polarization on Fe whereas Fe magnetic moment develops in Zr₃FeH₇ identified as ferromagnetic in the ground state. These differences in magnetic behaviors are due to the weakly ferromagnetic Fe largely affected by lattice environment, as opposed to strongly ferromagnetic Co. Hydrogenation of the binary intermetallics weakens the inter-metal bonding and favors the metal–hydrogen bonds leading to more cohesive hydrides as with respect to the pristine binaries. Charge analyses point to covalent like Fe versus ionic Zr and hydrogen charges ranging from covalent H^−0.27 to more ionic H^−0.5.     

Impact of chain architecture (branching) on the thermal and mechanical behavior of polystyrene thin films

The modulus and glass transition temperature (T_g) of ultrathin films of polystyrene (PS) with different branching architectures are examined via surface wrinkling and the discontinuity in the thermal expansion as determined from spectroscopic ellipsometry, respectively. Branching of the PS is systematically varied using multifunctional monomers to create comb, centipede, and star architectures with similar molecular masses. The bulk‐like (thick film) T_g for these polymers is 103 ± 2 °C and independent of branching and all films thinner than 40 nm exhibit reductions in T_g. There are subtle differences between the architectures with reductions in T_g for linear (25 °C), centipede (40 °C), comb (9 °C), and 4 armed star (9 °C) PS for ≈ 5 nm films. Interestingly, the room temperature modulus of the thick films is dependent upon the chain architecture with the star and comb polymers being the most compliant (≈2 GPa) whereas the centipede PS is most rigid (≈4 GPa). The comb PS exhibits no thickness dependence in moduli, whereas all other PS architectures examined show a decrease in modulus as the film thickness is decreased below ～40 nm. We hypothesize that the chain conformation leads to the apparent susceptibility of the polymer to reductions in moduli in thin films. These results provide insight into potential origins for thickness dependent properties of polymer thin films. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

The spinning,structure, and properties of cellulose/chitin blend filaments through HWM method

The aim of this paper is the preparation and characterization of cellulose/chitin blend filaments over the experimental blend ratio scope i.e., 2.89 and 6.46% (w/w) chitin content through high wet modulus (HWM) procedure. The spinnability of the invested solutions was found to vary in the following order: chitin < cellulose < 9.5:0.5 blend < 9:1 blend < 8:2 blend < 5:5 blend (9:1 means the mass ratio of cellulose to chitin, so does 9.5:0.5, 8:2, and 5:5). The cross‐section of the blend filaments is of chrysanthemum shape. It was shown through the SEM photographs that there existed grooves on the surface of filaments, which became coarse with increase in chitin content. Based on the data from X‐ray, sonic velocity, intensity, and hygroscopicity, it is concluded that the degree of crystallinity, dry and wet intensity modulus, degree of orientation, and regain rate of the filaments decreased with increase in chitin content in the experiment scope. The mechanical properties of the blend filaments are much higher than those of Crabyon fiber and normal viscose filaments, which proves that the HWM method is an efficient way of preparing cellulose/chitin blend filaments with satisfactory mechanical properties and processing property. The blend filaments prepared have an effective biostatic effect on Staphylococcus aureus, Escherchia coli, and Corinebaterium michiganence according to different testing standards. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and computational oxidation mechanism study of novel organosoluble aramids with high modulus by low‐temperature solution polycondensation

A series of highly organosoluble polyamides with high modulus having propeller‐shaped triarylamine were synthesized using aromatic diacid chlorides by low‐temperature solution polycondensation. The polyamide films had strong, tough, flexible, and amorphous properties. These polymers revealed electrochromic characteristics both in the visible range and near‐infrared (NIR) region, with a color change from pale yellowish at its neutral state to green and blue at its oxidized state at applied potentials ranging from 0.00 to 1.35 V. Cyclic voltammetry (CV) of the polymer films cast onto an indium tin oxide (ITO)‐coated glass substrate exhibited two reversible redox couples at potentials of 0.80–0.87 V and 1.19–1.25 V, respectively, vs. Ag/Ag⁺ in acetonitrile solution. From the combination of the experimental and computational study, we proposed an oxidation mechanism based on molecular orbital (MO) theory, which well explains the CV experimental result. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010